Hand Drill

Before you start...

• Make sure your work is securely clamped to the workbench
• Make sure you have enough room to work
• Make sure you are wearing the proper safety equipment and suitable clothing (see above)
• Make sure the cord is not in the line of where you are planning to cut
• If you need to plug in your tool, make sure the switch is off while you plug it in

DO’s and DON’T’s

• DO - Double check that your work is securely clamped. 
• DO - Make sure you are standing with feet firmly on the ground so you don’t fall over while working.
• DO - Only start cutting when the drill is in full motion.
• DO - Apply a firm downward pressure while you are drilling, or you won’t go through the wood
• DON’T - Hold the drill at an angle or on a tilt, drill straight downwards
• DO - Keep your hands away from the drill bit when you are drilling.
• DO - Use both hands to support the drill and push down.
• DON’T - Leave the drill plugged in when not in use, as you can accidentally press the trigger and start it unintentionally.

Instructional Video

How to use a hand drill safely...